Installed the cables for the pilot and copilot headsets, tie wrapped them to the fuselage down to the wiring channel. Ran them through the wiring channel to the front of the fuselage so once I install the avionics, they will be ready to connect. The baggage sack will get the holes cut in it to clear the jacks. Then the jacks are installed into the upper plate which will cover the holes in the sack and hold the jacks securely. The empty hole on the plate is for my 3.5mm recording jack that I can connect a GoPro to and record intercom and radio. I put a jack on each side since I think the GoPro mount can move around some.